Mid-axle implements - series xxl

Base frame:
Heavy construction, hydraulic pivot actuation - equipped with high-quality and changeable plastic bushings, parallel guide, slope control hydraulic, solenoid operated 3-way control block, two-lever shift control, control unit with check valves and flow dividers.

Cutter:
Robust and heavy design, different cutting disc speed, straight cutting discs with disc pressure adjustment. Cutting disc diameter 500mm, gearbox and bevel gear completely running in oil bath. Bevel gears hardened, cutting wheel shafts quadruple ball roller bearings. Next and high passage, further pendulum ejection, manual tilt adjustment on the device. Drive via hydraulic motor.

Sharping System:
Remote controled sharpening system for the cutter. The sharpening system sits directly on the cutter. Only for regular Cutter - not for Sawtooth-Cutter.

Plow away device:
Double disc plow for combined mounting on the cutter. Driven by hydraulic motor. Manual adjusment of the discs. Disc diameter 460 mm.

Sawtooth-Cutter:
Design and construction as the cutting device with straight cutting discs, but without pendulum ejection. The cutting wheel speed is twice as high and the running direction of the cutting wheels goes forward. As a result, a barking of the bifang is no longer necessary and the Sägezahnschneidscheiben must not be ground.

Disc plow with double disc:
Universally applicable auxiliary reduction angular gear with tapered roller bearing running in oil bath and hardened bevel gears. 2 discs with a diameter of 460 or 500mm. Due to the offset of the toothed discs, the gear can also be used for the use of a rotary harrow or a planting hole drill.

Gyro device:
Rotary head diameter 400mm with deflector and scraper. Attachment bearing, 5 pieces special protractor. Drive via hydraulic motor.
Optionally available a second gyro or an attachment disc.

Support wheel:
Low profile tire with extremely wide support, axle mounted with ball roller, including control function, hydraulic height adjustment and floating position.

Harrow:
Diameter 670mm, mounting on the disc plow angle gearbox

Planting hole drill:
Diameter 310mm, mounting on the disc plow angle gearbox

Additional oil reservoir:
Three-point support, hydraulic pump 80 l / min. at 540 rpm, 80 liter oil filling, oil filter, safety valve, hose equipment, oil cooling unit, transport wheels, drive shaft